4 Tips for Selecting Torsion Springs for Garage Doors

Torsion springs aid you every day to roll up or close your garage door. These springs counterbalance the weight of the garage door. If your garage door is not fitted with the right torsion spring, it may not work properly and lead to severe consequences.

Easy Steps to Select Torsion Springs for Garage Doors

Garage doors protect your vehicle and the people inside your home. So, it is very important to select the right type of torsion springs for your garage doors. Many types of torsion springs are available in the market. The below steps will help you select the right torsion spring for your garage door.

  • Length: You don’t need to unwind the torsion spring to measure its length. You can easily measure it from the first to the last coil of the spring. You can loosen setscrews on the winding cone to measure the spring.If the spring is not completely broken, avoid touching the setscrews because it may loosen up and the door may fall to its length. Thus, the appropriate length of the spring will depend on the and weight of your door. Note: Keep your fingers away from the spring while measuring it.
  • Wire Size: This refers to the thickness of the wire used in the spring. The easiest way to measure the wire size is to measure the first 10 coils. To measure- insert the tape between the first two coils and stretch it to the last coil where the 10th and 11th coil meet. When measuring wire size, ensure that all coils are compressed.
  • Spring Wind: A left wind spring is usually placed on the right-hand side of the door and right wind spring on the left side. This helps you understand if the spring is left wind or right wind.
  • Inner Diameter: It is difficult to measure the inner diameter of the torsion spring, so you can look for the markings on the side of winding cones. You can use a flashlight to read the markings on the door.The rolling and lifting capacity of the spring is proportional to its length. Thus, the appropriate length of the spring will depend on the size and weight of your door.


Along with the above-mentioned aspects, you also need to consider some other factors such as manufacturing material, weight of the garage door, etc. Remember, an appropriate torsion spring is the key to the safety of your vehicle and loved ones.